Read the pattern before naming the fault
Slab edges and capillary moisture becomes useful evidence when the sequence is recorded before the area is cleaned, opened or altered. Start with dampness, odor, staining or elevated moisture below the main living space and map the earliest location, the spread, the delay after the trigger and at least one comparable place where the symptom does not occur.
Map change across space and time
Sketch basement wall, slab edge, crawlspace soil, rim area or low mechanical zone, mark the first edge and repeat the same view after the relevant trigger. Note whether the pattern advances, retreats, moves with operation or remains fixed. The absence of change in a nearby reference area is evidence, not empty space.
Separate signal from background variation
Compare normal seasonal or operational variation with the repeatable feature described by How soil moisture moves through porous materials and joints without obvious flowing water. Record equipment state, weather, water use, occupancy and recent work so a later reader can reconstruct the event.
Keep competing routes visible
The leading physical pathway is ground moisture, rainwater, vapor movement and cooler surfaces can create overlapping below-grade symptoms Keep surface drainage, groundwater, capillary transport, humid-air condensation, plumbing leakage and stored wet materials active until timing, geometry and controls make one route more consistent than the others.
Build a field record another person can audit
Use dated photographs, a simple plan, consistent measurement points and short notes about what changed and what did not. Record uncertainty explicitly instead of filling gaps with a fault label.
When the map is strong enough to guide the next step
A useful signal map predicts what should recur, where it should be strongest and what should remain unaffected. If the prediction fails, revise the pathway before changing the building. The source set for this guide includes 4 official records selected for this path. They provide general technical and safety context; they do not determine the condition of a particular house.
Primary references for this topic family
These references ground the general building-science or safety context. They do not diagnose a specific house, replace local requirements or certify a repair.
