Scope guides
Understand source investigation, access, removal, drying, repair, reinstatement and verification as one complete sequence.
Roof leak scope guide
Plan source tracing, temporary protection, roof access, concealed-path review, drying and interior reinstatement as separate phases.
Flashing and penetration scope
Define which interface failed, how surrounding layers are inspected and how water shedding is verified after repair.
Gutter and downspout correction scope
Separate capacity, blockage, fall, joint leakage, outlet routing, discharge distance and building-envelope consequences.
Attic condensation scope
Combine indoor moisture sources, air leakage, ventilation, insulation, roof-deck condition and seasonal verification.
Attic air-leakage scope
Map bypasses, combustion and electrical boundaries, insulation disturbance, sealing sequence and post-work checks.
Crawlspace moisture scope
Address ground vapor, drainage, exterior water, air exchange, temperature, materials and safe access in one sequence.
Crawlspace odor scope
Separate source material, moisture, airflow transport, contamination controls and occupied-space verification.
Basement seepage scope
Distinguish surface runoff, wall entry, floor-wall junctions, plumbing, groundwater and finish consequences.
Foundation drainage scope
Define investigation, excavation limits, utilities, waterproofing, drainage, backfill, discharge and interior verification.
Grading and runoff scope
Plan elevations, water paths, thresholds, splashback, neighboring runoff, discharge and post-rain review.
Plumbing supply leak scope
Separate isolation, emergency mitigation, access, repair, pressure verification, drying and reinstatement.
Drain and waste leak scope
Include contamination controls, fixture testing, concealed-route access, repair verification and affected-material decisions.
Bathroom waterproofing scope
Distinguish sealant, plumbing, drainage, waterproofing, substrate and full-system restoration responsibilities.
Shower condensation scope
Address extraction, transfer air, heating, surface temperature, user load and finish resilience before cosmetic treatment.
Kitchen leak scope
Cover appliance, supply, drain, sink, worktop, cabinet, floor and concealed-wall interfaces.
Appliance-linked leak scope
Define connection checks, cycle testing, shutoff access, floor protection, drying and recurrence verification.
Window water-entry scope
Separate glazing, frame, perimeter seal, sill, flashing, facade and interior finish layers.
Window condensation scope
Combine indoor humidity, surface temperature, air movement, glazing performance and surrounding thermal bridges.
Wall-cavity moisture scope
Define evidence, opening location, containment, source tracing, drying, material decisions and closure criteria.
Facade crack and water-entry scope
Separate movement, finish cracking, joints, flashings, penetrations, exposure and underlying drainage plane.
Siding and cladding decay scope
Include source water, ventilation gap, fasteners, substrate, adjacent trim and safe extent-of-repair rules.
Timber decay scope
Address moisture source, structural role, extent, temporary support, replacement detail and drying verification.
Suspected mold remediation scope
Separate moisture correction, containment, removal method, cleaning limits, verification and reconstruction.
Persistent odor source scope
Avoid deodorizing-only work by defining source, transport path, affected materials, controls and recurrence testing.
Ventilation imbalance scope
Cover design intent, supply, exhaust, transfer paths, controls, pressure interactions and normal-use verification.
Exhaust duct repair scope
Define termination, routing, joints, insulation, condensate behavior, fan performance and accessible verification.
Heating-related moisture scope
Connect temperature distribution, air movement, combustion boundaries, humidity and envelope response.
Chimney and roof-interface scope
Separate masonry, cap, flashing, counterflashing, roof covering, condensation and interior damage.
Chimney condensation scope
Consider flue condition, appliance operation, temperature, ventilation, moisture source and qualified combustion review.
Slab and floor moisture scope
Define source hypotheses, floor system, vapor control, drainage, measurement limits and replacement criteria.
Cupped or distorted floor scope
Separate current moisture, historic wetting, underside conditions, acclimation, structural movement and finish choices.
Structural crack investigation scope
Record geometry and change, identify load paths, define professional review and avoid premature cosmetic closure.
Settlement monitoring scope
Set reference points, intervals, thresholds, drainage context and escalation before costly stabilization decisions.
Drying and restoration scope
Define affected materials, equipment, environmental targets, fixed measurement points, endpoint and reconstruction hold point.
Insulation replacement scope
Address why insulation became wet or displaced, air sealing, electrical boundaries, material choice and future inspection.
Finish restoration scope
Prevent cosmetic closure from preceding source correction, drying, substrate acceptance and verification planning.
